Introduction
This BSP provides a basis for development, deployment and execution of Linux based applications on the phyBOARD-WEGA-AM335x Single Board Computer (SBC). For detailed information on the various software components included in the release and how to use them, please refer to theQuickstart.
Versioning
This Release is compatible with the following hardware:
BSP Release Version | BSP Release Date | SOM PCB Version | CB PCB Version |
---|---|---|---|
PD13.0.0 | November 11th, 2013 | 1358.3 (DSC) | 1405.0 |
Expansion Modules
Module Name | Part Number | PCB Version | Description |
---|---|---|---|
Power Module | PEB-POW-01 | 1410.1 | 12 V - 24 V input voltage; 5 V and 3.3 V output voltage |
Evaluation Board | PEB-EVAL-01 | 1413.1 [1] | 3x User Buttons; 3x User LEDs; RS-232 via UART0; JTAG |
HDMI Display Adapter | PEB-AV-01 | 1406.0 | HDMI interface, Audio over I2S |
LCD Display Adapter | PEB-AV-02 | 1415.0 | Display / Touch Interface (LVDS / 4Wire) |
BSP Download
Release PD13.0.0 can be downloaded from the link below.
ftp://ftp.phytec.com/products/PBA-CD-02_phyBOARD-WEGA-AM335x/Linux/PD13.0.0/
Quickstart
Release PD13.0.0 should be used in conjunction with the following documentation:
What’s Supported
This BSP Release supports the following components:
- Linux Kernel: 3.2
- Processor: AM3354
- NAND Flash: Bootloader, Kernel, Filesystem
- UART: RS-232 on UART_1; RS-232 on UART_0 (PEB-EVAL-01) - default console
- USB: USB_0-OTG; USB_1-OTG enabled for Host mode
- Ethernet: 2x 10/100 Mbit/s (EMAC1 and EMAC2)
- SD / MMC: MMC_0 enabled
- CAN: CAN_1 enabled
- SPI: SPI_0 enabled
- I2C: I2C_0 enabled
EEPROM: at24 on I2C_0RTC: RV-4162-C7 external RTC on I2C_0
- GPIO: User LED; User button (PEB-EVAL-01)
- HDMI - experimental only supporting 720p and XGA (PEB-AV-01)
What’s Not Supported
This BSP Release does not support the following components:
- Display:
EDT ETM0700G0DH6 TTL (PEB-AV-02 - 1415.1 only)
- Touch:
Capacitive (PEB-AV-02 - 1415.1 only)
- Audio: Speaker-in; Speaker-out
- OpenGL
- Power Management: Standby and suspend-to-RAM
Fixed in this Release
N/A
New in this Release
N/A
Known Issues
- Fluid launcher flickers with 720p when rotating images
- Only LED3 on PEB-EVAL-01 can be used
Upgrade and Compatibility Information
To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.
Dependencies
N/A
Validation Information
Drivers have been tested with in-house test cases.
Technical Support
For further information or to report any problems, visit the PHYTEC Community or contact support@phytec.com.