This software release is maintained by www.phytec.de.
Introduction
This BSP provides a basis for development, deployment and execution of Linux based applications on the AM335X System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.
Versioning
Software
| Component | Version | |
|---|---|---|
| Linux Kernel | 3.12.30 | |
| Yocto | 1.7 | |
| OpenGL | OpenGL ES 2.0 (PowerVR SGX chipset driver 5.01.01.02) | |
| Qt | 5.3.2 | |
| barebox | 2015.02.0 | |
Compatible Hardware
| BSP Release Version | BSP Release Date | SOM PCB Version | CB PCB Version |
|---|---|---|---|
| phyBOARD-WEGA-AM335x-PD15.1.0 | 1358.3 | 1405.2 | |
| 1405.1 | |||
| 1405.0 |
Compatible Expansion Boards and Accessories
| Module Name | Part Number | PCB Version | Description |
|---|---|---|---|
| Evaluation Board | PEB-EVAL-01 | 1413.1 | 3x User Buttons; 3x User LEDs; RS-232 via UART0; JTAG |
| HDMI Display Adapter | PEB-AV-01 | 1406.1 | HDMI interface, Audio over I2S |
| 1406.0 [1] | |||
| LCD Display Adapter | PEB-AV-02 | 1415.1 | Display / Touch Interface (LVDS / 4Wire) |
| 1415.0 [1] |
[1] No HDMI Audio Support
BSP Download
Prebuilt images of phyBOARD-WEGA-AM335x-PD15.1.0 can be downloaded from the link below:
Quickstart
Quickstarts for phyBOARD-WEGA-AM335x-PD15.1.0:
PhyBOARD-WEGA-AM335x Linux Quickstart PD15.1.x
BSP Features
| Interface | Detail | Implemented | Tested | Notes |
|---|---|---|---|---|
| UART | uart0 | Yes | Yes | enabled - RS-232 on PEB-EVAL-01 Module |
| uart1 | Yes | Yes | enabled - RS-232 on Connector X66 | |
| uart2 | Yes | Yes | [click for info] | |
| uart3 | Yes | Yes | [click for info] | |
| uart4 | Yes | No | [click for info] | |
| uart5 | Yes | No | [click for info] | |
| I2C | i2c0 | Yes | Yes | enabled - Expansion Connector X69, X71 |
| i2c1 | Yes | No | [click for info] | |
| i2c2 | Yes | No | [click for info] | |
| Ethernet | 10/100 on SoM | Yes | Yes | enabled - RMII Mode |
| 10/100/1000 on CarrierBoard | Yes | Yes | enabled - MII Mode | |
| MCASP | mcasp0 | Yes | Yes | enabled |
| mcasp1 | Yes | No | [click for info] | |
| MMC/SDIO | mmc0 | Yes | Yes | enabled - microSD Connector X11 |
| mmc1 | Yes | No | [click for info] | |
| mmc2 | Yes | No | [click for info] | |
| Communication | TiWi-BLE Bluetooth | No | No | Planned for Future |
| TiWi-BLE WiFi | No | No | Planned for Future | |
| USB | usb0 | Yes | Yes | enabled- USB 2.0 Micro-AB OTG Connector X42 |
| usb1 | Yes | Yes | enabled - USB 2.0 Standard-A Connector X15 (Host) | |
| CAN | can0 | Yes | No | [click for info] |
| can1 | Yes | Yes | enabled - Connector X65 | |
| SPI | spi0 | Yes | Yes | enabled - Expansion Connector X69 |
| spi1 | Yes | No | [click for info] | |
| Display and Touch | LCD (24-bit Interface) | Yes | Yes | enabled - Requires LCD-018 option connected to PEB-AV-02 module |
| Analog LCD Touch | Yes | Yes | enabled - Requires LCD-018 option Touch Controller - i2c_ts (i2c0) | |
| HDMI | Yes | Yes | enabled - on I2C0, PEB-AV-01 module | |
| Backlight | Yes | Yes | enabled - Requires LCD-018 option | |
| GPIO | User Buttons and LEDs | Yes | Yes | User buttons: S1, S2, S3 on PEB-EVAL-01 module User leds: D1, D2, D3 on PEB-EVAL-01 module |
| Memory | 8/16-bit NAND Flash (GPMC) | Yes | Yes | enabled |
| EEPROM | Yes | Yes | enabled - on PEB-EVAL-01 module | |
| RTC | External RTC | Yes | Yes | enabled - RV-4162-C7 on i2c0 |
| PMIC RTC | Yes | Yes | enabled - TPS65910A3 on i2c0 | |
| AM335x RTC | No | No | Planned for Future | |
| Power Management | PMIC | Yes | Yes | enabled - TPS65910A3 on i2c0 |
| Audio | Codec TLV320AIC3007 | Yes | Yes | enabled - Speaker In/Speaker Out |
| JTAG | JTAG | N/A | N/A | Connector X21 |
[1] It may be possible to change the software configuration to utilize this interface even if it is not being set in the board's default configuration. Please see the Pin Attributes listed in TI's AM335x datasheet for more information on the various modes each pin can be muxed to.
Fixed In This Release
N/A
New In This Release
N/A
Known Issues
PHYTEC Known Issues
- No TiWi-Wifi support
- No TiWi-BLE support
Texas Instruments Known Issues
- See here for a list of TI's known issues for their SDK 7.0 kernel 3.12 release. PD15.1.0 is based on kernel 3.12.30 from TI.
Technical Support
For further support please visit PHYTEC's Support Portal