phyCORE-i.MX35 Release Linux BSP-PD10.1.2
phyCORE-i.MX35 Linux Board Support Package PD10.1.2 Release Notes
Versioning
This is Release PD10.1.2 of phyCORE-i.MX35 Linux Board Support Package (BSP).
Introduction
This BSP provides a basis for development, deployment and execution of Linux based applications on the phyCORE-i.MX35 System on Module.
For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.
BSP Download
Release PD10.1.2 can be downloaded from the link below.
ftp://ftp.phytec.de/pub/Products/phyCORE-iMX350/Linux/PD10.1.2/
Quickstart
Release PD10.1.2 should be used in conjunction with Quickstart version PD10.1.2:
What’s Supported
This BSP Release supports the following components:
- Linux Kernel and device drivers:
- USB Host: Keyboard, Mouse, Memory
- USB OTG: Device
- Ethernet
- SD/SDIO
- Audio: Line Out, Line In, Mic-In, Mixer
- I2C: EEPROM, RTC
- SPI
- CAN
- Display 320 x 240
Fixed in this Release
N/A
New in this Release
N/A
Known Issues
- Due to a hardware issue, booting from NAND is not possible with PL 1315.1 / 1315.2
Device Support
Upgrade and Compatibility Information
Dependencies
N/A
Validation Information
Technical Support
For further questions please visit the PHYTEC Support Portal