Skip to end of metadata
Go to start of metadata

Operating SystemLinux
BSP Release Status

RELEASED

Release Date

   

RepositoryPHYTEC Germany Public Repos
Binariesftp://ftp.phytec.de/pub/Software/Linux/BSP-Yocto-i.MX6/BSP-Yocto-i.MX6-PD16.1.0/images/
Source Archive
Release Notes

Click Here

This software release is maintained by www.phytec.de.



Introduction


 

This BSP provides a basis for development, deployment and execution of Linux based applications on the i.MX6 System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.

Versioning


Software


ComponentVersion
Linux Kernelv4.1.36
Yocto2.1.2 (Krogoth)
Qt5.6.2
Barebox2016.11.0
Host OS Tested on 64-bit Ubuntu 14.04 LTS
Tested Image

phytec-qt5demo-image


Supported Hardware


BSP Download


Prebuilt images of PD16.2.0 can be downloaded from the link below:

ftp://ftp.phytec.de/pub/Software/Linux/BSP-Yocto-i.MX6/BSP-Yocto-i.MX6-PD16.1.0/images/

Quickstart


Quickstarts for Yocto i.MX6:


Fixed In This Release


  • Kernel

    • i.MX6 DualLite/Solo Stability Issue at 396 Mhz.

      • Linux kernel patch "ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation".

      • Fixes Phytec's LPN-226e_1.

    • Fix phyCORE-i.MX6 stability (PMIC buckets)

    • Fix Micrel Ethernet PHY link detection issues at -30°C

    • Fix VM-010-BW and VM-010-COL for phyBOARD-SUBRA

New In This Release



  • Kernel

    • Update to Kernel v4.1.36 (v4.1 is an LTS kernel). Updated from v4.1.18.

    • Implement DA9062 and DA9063 Watchdog and reboot handler for phyFLEX and phyCORE in kernel and barebox (watchdog is not enabled by default)

    • Enable double vm-buffering in i.MX6 OpenGL Library and Qt

    • VM-012 support (vita1300)
    • RS485 Support
    • Kernel and device tree are now stored in static UBI volumes

      Method for updating the kernel, device tree, and rootfs has changed in this release. The kernel and device tree are now placed in a static UBI volume inside the rootfs partition.

  • Barebox

    • Updated version to 2016.11.0

    • updated NAND partitioning

    • Refactored barebox environment (More details?)

    • nv variables are saved automatically on shutdown

    • Implement DA9062 and DA9063 Watchdog and reboot handler for phyFLEX and phyCORE in kernel and barebox (watchdog is not enabled by default)


  • Yocto (meta-phytec, meta-yogurt)

    • Updated version to 2.1.2 (Krogoth)

      • meta-qt5 updated to Qt5.6.2 (Krogoth)
    • New phyBOARD-Mira machine configurations

    • Update vivante GPU library for i.MX6 QuadPLus

      • Galcore version 5.0.11.41671 from NXP kernel tag rel_imx_4.1.15_1.2.0_ga
    • gstreamer

      • add kmssink

      • add v4l2 encoder for i.MX6 VPU

      • add bayer2rgb-neon

    • tuxracer recipe in meta-yogurt

    • bvtest: crop support

Not Supported


N/A

Known Issues


PHYTEC Known Issues

  • Kernel
    • CAN does not work with 10Kbaud (This was also an issue in previous releases)
    • QuadPlus:
      • Display and HDMI do not work

Technical Support

For further information or to report any problems, visit the PHYTEC Support Portal