Skip to end of metadata
Go to start of metadata

Operating SystemLinux
BSP Release Status

RELEASED

Release Date
 
Repository 
Binariesftp://ftp.phytec.com/products/PCM-051_phyCORE-AM335x/Linux/PD13.1.2/
Source Archive 
Release Notes

Click Here


Introduction

This BSP provides a basis for development, deployment and execution of Linux based applications on the phyCORE-AM335X System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.

Versioning

ComponentVersion
Linux Kernel3.2
Barebox2013.07.0
u-boot2013.07.0
PTX Distribution2013.01.0
OSELAS Toolchain2012.12.1
 

This Release is compatible with the following hardware:

BSP Release VersionBSP Release DateSOM PCB VersionCB PCB Version
PD13.1.2January 9th, 20141358.31359.3
1358.2 [1]1359.2

[1] Due to updated RAM timings different software is required to boot the board. Please use BSP Download PCM-051-12102F0I.A0 images that have modified versions of the bootloaders.

BSP Download

Release PD13.1.2 can be downloaded from the link below.

ftp://ftp.phytec.com/products/PCM-051_phyCORE-AM335x/Linux/PD13.1.2/

Quickstart

Release PD13.1.2 should be used in conjunction with Quickstart version L-775e_3:

What’s Supported

This BSP Release supports the following components:

  • Linux Kernel: 3.2
  • NAND Flash: Bootloader, Kernel, Filesystem
  • NOR Flash: Bootloader, Kernel, Filesystem
  • UART: RS-232 on UART_0; UART_1
  • USB: USB_0-OTG enabled for Host mode; USB_1-OTG enabled for Host mode
  • Ethernet: ETH1 from RMII1 (not stable above 96 Mbit/s); RGMII2
  • SD / MMC: MMC_0 enabled; MMC_2 used with WiFi; all other MMC not tested

WiFi: TiWi R2 on MMC_2

  • CAN: CAN_0 enabled
  • SPI: SPI_0 enabled
  • I2C: I2C_0 enabled

EEPROM: at24 on I2C_0PMIC: TPS65910A3 on I2C_0RTC: RV-4162-C7 external RTC on I2C_0; PMIC TPS65910A3 RTC on I2C_0

  • Audio: Wolfson Codec WM8974 Headphones, Mono out, Mic in, Speakers
  • Display:

Prime View PD050VL1 LVDS (LCD-017-050V)Prime View PM070WL4 LVDS (LCD-017-070W)Prime View PD104SLF LVDS (LCD-017-104S)EDT ETM0700G0DH6 TTL (LCD-018-070-KAP)Hitachi TX09D70VM1CCA TFT (LCD-011)

  • Graphics: OpenGL binaries under TSPA license

What’s Not Supported

This BSP Release does not support the following components:

  • Bluetooth: TiWi R2 on McASP1/UART_1
  • Power Management: Standby and suspend-to-RAM

Fixed in this Release

  • Compile error with OpenGL on some host machines
  • sgx_flip_test failure
  • Display Params are now also passed when booting from net
  • Writing i2c EEPROM in barebox is fixed
  • Added patches to detect 1GB RAM and 1GB NAND correct

New in this Release

  • OpenGL (Graphics_SDK_setuplinux_4_10_00_01)

Known Issues

  • Ethernet Problems in rage of 97Mbit/s -100Mbit/s
  • LiveDVD runs Ubuntu 12.04 LTS which requires a security update for OpenSSL to protect against the heartbleed bug

Upgrade and Compatibility Information

To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.

Dependencies

N/A

Validation Information

Drivers have been tested with in-house test cases.

Technical Support

For further information or to report any problems, visit the PHYTEC Community or contact support@phytec.com.