Introduction
This BSP provides a basis for development, deployment and execution of Linux based applications on the phyCORE-LPC3250 System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.
Versioning
This Release is compatible with the following hardware:
SOM PCB Version | CB PCB Version |
---|---|
1304.2 | 1305.3 |
BSP Download
Download pre-built images from the following link:
The BSP is integrated in the Linux Target Image Builder (LTIB). Refer to the Quickstart for addition information and use the following link to download the netinstall script:
Quickstart
The phyCORE-LPC3250 BSP should be used in conjunction with the following Quickstart:
What’s Supported
This BSP Release supports the following components:
- NAND Flash
- Memory Controller
- DMA
- COMM
- USB: Host; Device
- Ethernet
- SD/MMC
- SDIO
- I2C
- I2S
- SPI
- RTC: on-board / on-chip
- Touch
- Audio
- Display: Hitachi TX09D71VM1CCA (LCD-011) and compatible LCD displays (TFT/QVGA)
- Timer
- Clock Control
- Interrupt Controller
- Keyscan
What’s Not Supported
This BSP Release does not support the following components:
N/A
Fixed in this Release
N/A
New in this Release
N/A
Known Issues
N/A
Upgrade and Compatibility Information
To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.
Dependencies
N/A
Validation Information
Drivers have been tested with in-house test cases.
Technical Support
For further support please visit PHYTEC's Support Portal