Skip to end of metadata
Go to start of metadata

Operating SystemLinux
BSP Release Status

RELEASED

Release Date
 
Repository 
Binaries 
Source Archive 
Release Notes

Click Here


Introduction

This BSP provides a basis for development, deployment and execution of Linux based applications on the phyCORE-Vybrid System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.

Versioning

ComponentVersion
TimeSys Factory20130114
Linux Kernel3.0
u-boot2011.12
 

This Release is compatible with the following hardware:

BSP Release VersionBSP Release DateSOM PCB VersionCB PCB Version
PD13.0.0alpha1/25/20131374.01375.2

BSP Download

Release PD13.0.0alpha can be downloaded from the link below.

<ftp_link>

Quickstart

Release PD13.0.0alpha should be used in conjunction with Quickstart version PD13.0.2:

What’s Supported

This BSP Release supports the following components:

  • U-Boot: boot modes - SD/MMC, TFTP
  • Linux Kernel: 3.0
  • UART: RS-232 via SCI_1
  • SD/MMC: MMC via MCU_PTA24-29 signals
  • Ethernet: RMII0
  • RTC: Internal RTC
  • I2C driver: I2C_2 enabled
    • EEPROM: at24 on I2C_2
    • TSC: STMPE811 on I2C_2
  • Display: Prime View PD070WL4 LVDS

What’s Not Supported

This BSP Release does not support the following components:

  • U-Boot: NAND; SPI-NOR boot mode
  • UART: RS-232 via SCI_2
  • Ethernet: RMII1
  • SPI: SPI_A; SPI_B
  • CAN: CAN_0; CAN_1
  • USB: USB_0-OTG; USB_1-OTG
  • Audio: Freescale Codec SGTL5000 connected to I2S (I2C_0)
  • RTC: RV-4162-C7 on I2C_2
  • Light Sensor: connected on I2C_2
  • Timer: Watchdog; High Speed
  • Power Management: Suspend to RAM

Fixed in this Release

N/A - First BSP Release

New in this Release

N/A - First BSP Release

Known Issues

N/A

Upgrade and Compatibility Information

To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.

Dependencies

N/A

Validation Information

Drivers have been tested with in-house test cases.

Technical Support

For further support please visit PHYTEC's Support Portal