Date: Fri, 29 Mar 2024 11:53:04 +0100 (CET) Message-ID: <838782283.22.1711709584618@[172.25.0.138]> Subject: Exported From Confluence MIME-Version: 1.0 Content-Type: multipart/related; boundary="----=_Part_21_1400319010.1711709584616" ------=_Part_21_1400319010.1711709584616 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Content-Location: file:///C:/exported.html
This BSP provides a basis for development, deployment and execution of L= inux based applications on the phyFLEX-i.MX6 System on Module (SOM). For de= tailed information on the various software components included in the relea= se and how to use them, please refer to the Quickstart<= /a>.
This Release is compatible with the following hardware:
BSP Release Version | BSP Release Date | SOM PCB Version | FLEX Mapper Board Version | FLEX Baseboard Version |
---|---|---|---|---|
PD14.1.0_EA1 | July 14th, 2014 | 1362.2 | 1367.3 | 1364.4 |
1362.1 | 1367.2 [A] | 1364.3 [B] | ||
1367.1 [B] | 1364.2 [A] |
[A] Does not fully support PCIe. FLEX Mapper board does not include= nPCIe0_PERST. FLEX Baseboard missing 100=CE=A9 termination resistor on PCI= e clock and reset for an extra PCIe.[B] Hardware interface does not su= pport Camera0 interface extension and full 18-bit Camera0 (missing J6 and J= 7 for CSI0_DAT3 and CSI0_DAT2 signal multiplexing). Different reset out cir= cuitry for Camera0 and Camera1. JP12 does not exist (X_CAMERA1_CLK & X_= CAMERA0_CLK).
Release PD14.1.0_EA1_Yocto can be downloaded from the link below.
ftp://ftp.phytec= .com/products/PFL-A-02_phyFLEX-iMX6/Linux/PD14.1.0_EA1_Yocto/
There are a wide variety of configurations (Quad/DualLite/Solo, RAM size= s, and WiFi) for the phyFLEX-i.MX6 SOM. Please note that there are differen= t versions of software for each configuration.
Current support is available for the i.MX6 Quad with 1 GB, 1 bank of RAM= . Additional configurations are targeted to be supported in the next BSP re= lease.
Release PD14.1.0_EA1_Yocto should be used in conjunction with Quickstart= version PD14.1.0_EA1_Yocto:
This BSP Release supports the following components:
Quad: 1GB, 1GB_1bank, 4GB[1]
Resistive: STMPE811 on I2C0 (device on Baseboard)
Prime View PM070WL4 LVDS (LCD-017-070W)DVI / HDMI
Signal names may change between processor and PCBs. Please refer to phyF= LEX-i.MX6 Hardware Manual for signal name mapping.
This BSP Release does not support the following components:
Prime View PD050VL1 LVDS (LCD-017-050V)Prime View PD104SLF LVDS (LCD-017= -104S)EDT ETM0700G0DH6 TTL (LCD-018-070-KAP)
N/A
Workaround: Do not bring eth0 down while another interface is up (ex. wl= an0).
Workaround: Use NFS-based root filesystem or sd-card based root filesyst= em.Required Fix: The MKUBIFS_ARGS setting must be configured to match how b= arebox is reading the partition, or the partition scheme itself is offset i= ncorrectly.
This BSP is not backwards compatible and has no workaround for 1362.0 SO= M and 1364.1 Baseboard due to a change in PCB pinout, see Modification of the pinout for the phyFLEX-i.MX6 (PL= F-A-XL1).
N/A
Drivers have been tested with in-house test cases.
For further support please visit PHYTEC's Support Portal.<= /p>