Date: Thu, 28 Mar 2024 16:03:14 +0100 (CET) Message-ID: <1298112751.252.1711638194521@[172.25.0.138]> Subject: Exported From Confluence MIME-Version: 1.0 Content-Type: multipart/related; boundary="----=_Part_251_226860191.1711638194520" ------=_Part_251_226860191.1711638194520 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Content-Location: file:///C:/exported.html
This software release is maintained by www.phytec.de.=
This BSP provides a basis for develop= ment, deployment and execution of Linux based applications on the i.MX6 Sys= tem on Module (SOM). For detailed information on the various software compo= nents included in the release and how to use them, please refer to the = ;Qui= ckstart.
phyFLEX-i.MX6 SOM and Kit = (Quad, DualLite, and Solo)
Single Board Computers:
phyBOARD-Mira (Quad, Quad Plus, DualLit= e, Solo)
phyBOARD-Subra
Prebuilt images of PD16.1.1 can be downloaded from the link below:
ftp://ftp.phytec.de/pub/Software/Linux/BSP-Yocto-i= .MX6/BSP-Yocto-i.MX6-PD16.1.1/images/
Quickstarts for Yocto i.MX6: BSP Yocto i.MX6 Manual PD16.1.x
Kernel
CAN is now working with 10 kbaud
A bug was fixed where the LVDS display sometimes did not show anythi= ng after boot. This bug is described in erratum ERR009219
Fixed a typo in the HDMI devicetree node which prevented DDC to work= correctly.
The npwrdn GPIO assignement on the phytec-mediabus was fixed from GP= IO5_27 to GPIO3_9 on the phyBOARD-Mira.
Fixed a bug described by erratum ERR007117 which led to an infrequen= t detection failure of the NAND flash during boot.
Fixed a GPU stability issue where the GPU clocks run on clock rates = which were to high by default.
Fixed a stability issue when switching the internal LDOs of the i.MX= 6DualLight into bypass mode.
Introduced small performance improvements by disabling spinlock debu= g logging which is enabled by default.
Barebox
Barebox devicetree now supports environment on SPI-NOR flash
Fixed the CS0_END RAM setting for the i.MX 6QuadPlus
Fixed a bug described by erratum ERR007117 which led to an infrequen= t detection failure of the NAND flash during boot.
Improved RAM timings for i.MX6 DualLite\Solo (400 MHz) on all phyFLE= X machines.
Added support for ISSI and Winbond NOR flash
Winbond W25Q128
ISSI IS25LP128
Added support for Winbond NAND
Linux kernel upgraded to v4.1.46 (from v4.1.36)
N/A
For further information or to report = any problems, visit the PHYTEC Support Portal