...
The phyBOARD‑Segin i.MX 6UL/ULL is used as an example to describe all steps necessary to connect the Wi-Fi adapter and to enable the expansion boards configuration in barebox, as well as to change the wireless network configuration in the phyBOARDLinux.
Requirements
The following hardware and software is required to implement WiFi on a phyBOARD SBC with PEB-WLBT-01the WiFi expansion add on. Deviations from these requirements may suffice, or may have other workarounds.
...
| Code Block | ||
|---|---|---|
| ||
bootloader$ rebootreset |
After enabling the Wi-Fi module on the expansion board and booting the kernel, you should see an output in the boot log on your console similar to the following:
...
The adapter can be configured either as Wi-Fi hotspot or as Wi-Fi Direct client. Please refer to chapter "How to change the Wireless Network Configuration" of the Phytec Yocto Reference Manual for setup info at:
...