...
| Note |
|---|
The following is an example describing the structure of the device tree for the standard phyFLEX-i.MX6 RDK (machine configuration phyflex-imx6-2). Please look at the dts file corresponding to your machine configuration for the included dtsi files. |
| Default dts target | imx6q-phytec-pbab01.dtb |
| Default dtsi include description | Default dtsi include list |
|---|---|
| Processor | imx6q.dtsi (includes imx6qdl.dtsi) |
| SOM | imx6q-phytec-pfla02.dtsi (includes imx6qdl-phytec-pfla02.dtsi) |
| Carrier Board | imx6qdl-phytec-pbab01.dtsi |
| LCD | imx6qdl-phytec-lcd.dtsi |
Supported Hardware Versions
...
The following camera modules are supported in the BSP. The default camera enabled in this BSP is in bold. Click Here for more details regarding PHYTEC's camera modules. See this How-To Guide for instructions on enabling expansion boards in Barebox.
Camera | Description |
|---|---|
VM-006-BW | phyCAM-P MT9M001 bw 1.3MP |
VM-006-BW-LVDS | phyCAM-S+t MT9M001 bw 1.3MP |
VM-008 | phyCAM-P/phyCAM-S+ PAL/NTSC Wandler |
VM-009-LVDS | phyCAM-S+ MT9M131 col 1.3MP |
VM-009 | phyCAM-P MT9M131 col 1.3MP |
VM-010-BW-LVDS | phyCAM-S+ MT9V024 bw WVGA |
VM-010-BW | phyCAM-P MT9V024 bw WVGA |
VM-010-COL-LVDS | phyCAM-S+ MT9V024 col WVGA |
VM-010-COL | phyCAM-P MT9V024 col WVGA |
VM-011-BW-LVDS | phyCAM-S+ MT9P006 bw 5MP |
VM-011-BW | phyCAM-P MT9P006 bw 5MP |
VM-011-COL-LVDS | phyCAM-S+ MT9P006 col 5MP |
VM-011-COL | phyCAM-P MT9P006 col 5MP |
| VM-012-BW | phyCAM-P VITA1300 bw 1.3MP |
| Anchor | ||||
|---|---|---|---|---|
|
...