| Hide If | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Table of Contents
1 About this Quickstart
...
- ptxdist-2011.11.0 for installing/constructing the cross-compile toolchain (Optional if using a pre-existing environment)
- ptxdist-2013.01.0 for building the BSP with the toolchain mentioned above.
...
The following instructions correspond to downloading PTXdist for building the BSP, ptxdist-2013.01.0. Therefore, to download the PTXdist software for building the toolchain, ptxdist-2011.11.0, repeat the instructions replacing 2013.01.0 with 2011.11.0. In order to be built, extract the archive containing the PTXdist software:
...
Note: To use WiFi on the target, an inserted SD Card at SDMMC1 (X11) is required.
6 Managing Images
The phyCORE-OMAP44xx is pre-loaded with kit demo images in NAND Flash. Images located on the PHYTEC FTP or built images can be run on the target.
...