Kernel
- i.MX6 DualLite/Solo Stability Issue at 396 Mhz.
  - Linux kernel patch "ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation".
  - Fixes Phytec's LPN-226e_1.
- Fix phyCORE-i.MX6 stability (PMIC buckets)
- Fix Micrel ethernet phy Ethernet PHY link detection issues at -30°C
- Fix VM-010-BW and VM-010-COL for phyBOARD-SUBRA

Update to Kernel v4.1.36 (v4.1 is an LTS kernel)
Implement DA9062 and DA9063 Watchdog and reboot handler for phyFLEX and phyCORE in kernel and barebox watchdog is not enable by default
Enable double buffering in i.MX6 OpenGL Library and Qt
VM-012 support (vita1300)
RS485 Support

Kernel and device tree are now stored in static UBI volumes

Note
Method for updating the kernel, device tree, and rootfs has changed in this release. The kernel and device tree are now placed in a static UBI volume inside the rootfs partition. See Section 5 of the Yocto AM335x Manual for instructions. Section 5.4, "Troubleshooting Nand Flash Update", provides additional info when updating from a previous BSP release.

Barebox
- Updated version to 2016.11.0
- updated NAND partitioning
- Refactored barebox environment (More details?)
- nv variables are saved automatically on shutdown
Yocto (meta-phytec, meta-yogurt)
- Updated version to 2.1.2 (Krogoth)
- New phyBOARD-Mira machine configurations
- Update vivante GPU library for i.MX6 QuadPLus
  - Galcore version 5.0.11.41671 from NXP kernel tag rel_imx_4.1.15_1.2.0_ga
- gstreamer
  - add kmssink
  - add v4l2 encoder for i.MX6 VPU
  - add bayer2rgb-neon
- tuxracer recipe in meta-yogurt
- bvtest: crop support

Not Supported

...

N/A

Known Issues

...

...