Contents
Versioning
This is Release PD10.2.0 of phyCORE-i.MX35 CE 6.0 Board Support Package (BSP).
Introduction
This BSP provides a basis for development, deployment and execution of CE 6.0 based applications on the phyCORE-i.MX35 System on Module.
For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.
BSP Download
Release PD10.2.0 can be downloaded from the link below.
ftp://ftp.phytec.de/pub/Products/phyCORE-iMX350/WinCE6.0/PD10.2.0/
Quickstart
Release PD10.2.0 should be used in conjunction with Quickstart version PD10.2.0:
What’s Supported
This BSP Release supports the following components:
- Device drivers:
- USB Host: Keyboard, Mouse, Memory
- USB OTG: Device only for Activesync
- Ethernet
- SD/SDIO
- I2C: EEPROM, RTC
- SPI
- CAN
- Display 320 x 240
For further information or to report any problems, contact PHYTEC Technical Support.