|
This BSP provides a basis for development, deployment and execution of Android based applications on the phyCORE-OMAP44xx System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.
|
This Release is compatible with the following hardware:
BSP Release Version | BSP Release Date | SOM PCB Version | CB PCB Version |
---|---|---|---|
Jelly Bean v2.0 | March 1st, 2013 | 1347.1 | 1348.2 |
1347.2 |
Release Jelly Bean v2.0 can be downloaded from the link below.
ftp://ftp.phytec.com/products/PCM-049_phyCORE-OMAP44xx/Android/JellyBean/v2.0
Release Jelly Bean v2.0 should be used in conjunction with Quickstart version Jelly Bean v2.0:
This BSP Release supports the following components:
This BSP Release does not support the following components:
N/A
Workaround: Flash the uImage-nokeypad Kernel. This deactivates the keypad interface but now the touch inputs are correct.
To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.
N/A
Drivers have been tested with in-house test cases.
For further information or to report any problems, contact PHYTEC Technical Support.