Introduction
This BSP provides a basis for development, deployment and execution of Linux based applications on the phyCORE-OMAP44xx System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.
Versioning
| Component | Version |
|---|
| Windows Embedded Compact | Based on TI Release BSP_WINCE_A9 - TI r26 BSP |
|
|
This Release is compatible with the following hardware:
| BSP Release Version | BSP Release Date | SOM PCB Version | CB PCB Version |
|---|
| PD12.2.0 | September 21st, 2012 | 1347.1 | 1348.2 |
BSP Download
Release PD12.2.0 can be downloaded from the link below.
ftp://ftp.phytec.com/products/PCM-049_phyCORE-OMAP44xx/Compact7/PD12.2.0
Quickstart
Release PD12.2.0 should be used in conjunction with Quickstart version L-763e_0:
What’s Supported
This BSP Release supports the following components:
- Boot Modes: NAND Flash; NOR Flash; SD Card; Image download over KITL
- UART: RS-232 on UART_3 - EBOOT and debugging; all other UART not tested
- Ethernet: 10/100 Mbit - LAN92211 over GPMC
- SD/MMC : SDMMC_1; all other SDMMC not tested
- USB: USB_OTG - ActiveSync; USB Host - Memory devices, keyboard, mouse
- SPI driver
- I2C driver
- EEPROM: at24 on I2C_1
- PMIC: TWL6030 on I2C_1
- RTC: PMIC (TWL6030) RTC - GetSystemTime and SetSystemTime functions
- TSC: STMPE811 on I2C_4 (device on carrier board)
- Display: Prime View PM070WL4 LVDS (LCD-017-070W)
- Audio: Mixer, Line in, Line out, MIC in
- Codecs: MPEG, DivX, H.264, JPEG
- DVFS: up to 1 GHz
What’s Not Supported
This BSP Release does not support the following components:
- OpenGL
- OpenVG
- Camera Interface: MT9M001, MT9V022 - Available upon request
- Video Encoder: Streaming, TV - Available upon request
- 1 wire: Available upon request
- Power Management: Suspend to RAM - Available upon request
Fixed in this Release
N/A
New in this Release
- Merged together with TI r26 BSP Release
- Video codec support
- SPI tested
Known Issues
N/A
Upgrade and Compatibility Information
To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.
Dependencies
N/A
Validation Information
Drivers have been tested with in-house test cases.
Technical Support
For further information or to report any problems, contact PHYTEC Technical Support.