Introduction

This BSP provides a basis for development, deployment and execution of Linux based applications on the phyCORE-LPC3250 System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.

Versioning

This Release is compatible with the following hardware:

BSP Download

Download pre-built images from the following link:

• ftp://ftp.phytec.com/products/PCM-040_phyCORE-LPC3250/Linux

The BSP is integrated in the Linux Target Image Builder (LTIB). Refer to the Quickstart for addition information and use the following link to download the netinstall script:

• http://www.ltib.org/resources-download

Quickstart

The phyCORE-LPC3250 BSP should be used in conjunction with the following Quickstart:

• phyCORE-LPC3250 Quickstart Instructions

What’s Supported

This BSP Release supports the following components:

• NAND Flash
• Memory Controller
• DMA
• COMM
• USB: Host; Device
• Ethernet
• SD/MMC
• SDIO
• I2C
• I2S
• SPI
• RTC: on-board / on-chip
• Touch
• Audio
• Display: Hitachi TX09D71VM1CCA (LCD-011) and compatible LCD displays (TFT/QVGA)
• Timer
• Clock Control
• Interrupt Controller
• Keyscan

What’s Not Supported

This BSP Release does not support the following components:

N/A

Fixed in this Release

N/A

New in this Release

N/A

Known Issues

N/A

Upgrade and Compatibility Information

To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.

Dependencies

N/A

Validation Information

Drivers have been tested with in-house test cases.

Technical Support

For further support please visit PHYTEC's Support Portal