Introduction
This BSP provides a basis for development, deployment and execution of MQX based applications on the phyCORE-Vybrid System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.
Versioning
| Component | Version |
|---|
| MQX RTOS | 4.0.1 | | ARM DS-5 | 5.14 | | Linux Kernel | 3.0 | | u-boot | 2011.12 |
|
|
This Release is compatible with the following hardware:
| BSP Release Version | BSP Release Date | SOM PCB Version | CB PCB Version |
|---|
| PD13.2.0 | 8/7/2013 | 1374.0 | 1375.2 |
BSP Download
Release PD13.2.0 can be downloaded from the link below.
ftp://ftp.phytec.com/products/PCM-052_phyCORE-Vybrid/MQX/PD13.2.0
Quickstart
Release PD13.2.0 should be used in conjunction with Quickstart version QS1.0:
What’s Supported
This BSP Release supports the following components:
- UART: RS-232 via SCI_1; RS-232 via SCI_2
- USB: USB_0 in Host Mode - mass storage device, keyboard, mouse; USB_1 in Host Mode - mass storage device, keyboard, mouse
- Ethernet: RMII0; RMII1
Note:
The Ethernet PHY supported on this BSP is KSZ8051RNLI. Due to EOL this part has been replaced with KSZ8081RNBIA. SOMs with part number PCM-052-1210321CI.A3 will be populated with KSZ8081RNBIA. Ethernet functionality is the same for SOMs populated with the KSZ8051RNLI or KSZ8081RNBIA. The KSZ8081RNBIA PHY has a different model number that will be added to the software in the next BSP release.
- SPI: DSPI0 - not tested
- I2C driver: I2C_2 enabled
- EEPROM: at24 on I2C_2
- Light sensor: on I2C_2
- Display: Prime View PM070WL4 LVDS (LCD-017-070W) - no demo available/not tested
- Watchdog
- High Speed Timer
- MCC: Cortex-A5 (Linux) and Cortex-M4 (MQX)
What’s Not Supported
This BSP Release does not support the following components:
- NAND Flash
- SPI NOR Flash
- CAN: CAN_0; CAN_1
- RTC: RV-4162-C7 on I2C_2
- TSC: STMPE811 on I2C_2
- Power Management: Suspend to RAM
Fixed in this Release
- Ethernet 1 support in the BSP
New in this Release
- Cortex-A5 support
- RS-232 via SCI_2
- USB_0 in Host Mode - mass storage device, keyboard, mouse
- USB_1 in Host Mode - mass storage device, keyboard, mouse
- SPI
- Light Sensor
- ADC
- Watchdog
- High Speed Timer
Known Issues
- Only one ADC channel can be enabled at a time, ADC0 or ADC1
Workaround: Apply the patch available here: ftp://ftp.phytec.com/products/PCM-052_phyCORE-Vybrid/MQX/PD13.2.0/0002-pcm052-bug-fix-for-lwadc.patch
- USB0 and USB1 mouse example works for mouse clicks only
Upgrade and Compatibility Information
To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.
Dependencies
N/A
Validation Information
Drivers have been tested with in-house test cases.
Technical Support
For further information or to report any problems, contact PHYTEC Technical Support.