|
This is a ALPHA BSP. Please use this BSP for evaluation purposes. Future Production Quality releases will be made. |
This BSP provides a basis for development, deployment and execution of Linux based applications on the iMX7 System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the quick start.
| ||||||||||||||||
| Default dts target | imx7d-phyboard-zeta.dts | |
| Default dtsi include description | Default dtsi include list | |
| SOM | imx7d-phycore-som.dtsi | |
| Carrier Board | imx7d-pba-c-09.dtsi | |
| LCD Display Adapter | imx7d-peb-av-02.dtsi | |
| Evaluation Board | imx7d-peb-eval-02.dtsi | |
Alternate dts imx7d-phyboard-zeta-m4.dtb: configure u-boot to use this DTS if running Linux on the Cortex-A7 while running FreeRTOS on the Cortex-M4
| Hardware Description | Part Number | PCB Version |
|---|---|---|
| phyCORE-i.MX7 SOM | PCM-061.A4 | 1458.2 |
| phyBOARD-Zeta Carrier Board | PBA-C-09.A4 | 1459.2 |
Device tree changes are required to support earlier SOM and Carrier Board revisions. Visit the PHYTEC Support Portal to open a support ticket for help on how to make the device tree changes. |
| Module Name | Part Number | PCB Version | Description |
|---|---|---|---|
| LCD Display Adapter with 7'' capacitive display | PEB-AV-02-TC.A0 (AV module), AC104 (display), and WF061 (cable) | 1415.1 | ETM0700G0DH6 LCD Display/ Capacitive touch interface |
| Evaluation Board | PEB-EVAL-02 | 1460.0 | Connects to expansion connector and provides: UART1, UART2, JTAG, I2C EEPROM, three user buttons, three user LEDs |
Prebuilt images of BSP-Yocto-FSL-iMX7-ALPHA2 can be downloaded and extracted from the link below:
BSP-Yocto-FSL-iMX7-ALPHA2.xml-b8.tar.bz2
Quickstarts for BSP-Yocto-FSL-iMX7-ALPHA2:
BSP Yocto FSL i.MX7 ALPHA2 Quickstart
| Interface | Detail | Implemented | Tested | Status in Device tree | Notes |
|---|---|---|---|---|---|
| UART | uart1 | Yes | Yes | Enabled | DB9 connector on PEB-EVAL-02 |
| uart2 | Yes | Yes | Enabled | DB9 connector on PEB-EVAL-02 | |
| uart3 | Yes | No | [click for info] | expansion header | |
| uart4 | Yes | No | [click for info] | ||
| uart5 | Yes | Yes | Enabled | RS232 default serial console at Connector X2 | |
| uart6 | Yes | No | [click for info] | expansion header | |
| uart7 | Yes | No | [click for info] | expansion header | |
| I2C | i2c1 | Yes | Yes | Enabled | expansion header |
| i2c2 | Yes | Yes | Enabled | AV Connector X4 | |
| i2c3 | Yes | No | [click for info] | ||
| i2c4 | Yes | Yes | Enabled | expansion header | |
| Ethernet | RGMII1 | Yes | Yes | Enabled | KSZ9031RNX PHY on SOM, Connector X8 |
| RGMII2 | Yes | Yes | Enabled | KSZ9031RNX PHY on CarrierBoard, Connector X7 | |
| SAI | sai1 | Yes | No | Audio/Video Connector X4 | |
| sai2 | Yes | No | [click for info] | expansion header | |
| sai3 | Yes | No | [click for info] | ||
| MMC/SDIO | SD1 | Yes | Yes | Enabled | microSD slot connector X11 |
| SD2 | Yes | No | [click for info] | expansion header | |
| SD3 | Yes | Yes | Enabled | signals routed to eMMC. | |
| Communication | TiWi-BLE Bluetooth | No | No | ||
| TiWi-BLE WiFi | No | No | |||
| USB | usb1 | Yes | Yes | Enabled | USB-A Host Connector X9 |
| usb2 | Yes | Yes | Enabled | USB-AB OTG Connector X10 | |
| CAN | can1 | Yes | Yes | Enabled | Header X1 |
| can2 | Yes | No | [click for info] | ||
| SPI | spi1 | Yes | No | [click for info] | expansion connector |
| spi2 | Yes | No | [click for info] | expansion connector | |
| spi3 | Yes | No | [click for info] | expansion connector | |
| spi4 | Yes | No | [click for info] | ||
| Display and Touch | LCD Display | Yes | Yes | Enabled | via expansion board PEB-AV-02 |
| Analog LCD Touch | Yes | Yes | Enabled | Capacitive ETM-FT5x06 via expansion board PEB-AV-02 | |
| HDMI | No | No | via expansion board PEB-AV-01 | ||
| Backlight | Yes | Yes | Enabled | PWM via pwm4 via expansion board PEB-AV-02 | |
| GPIO | User Buttons and LEDs | Yes | Yes | Enabled | User LED GPIO2_10 on CarrierBoard Three user LEDs and three buttons on PEB-EVAL-02 |
| Memory | 8/16-bit NAND Flash (GPMC) | Yes | No | MT29F4G08 - not populated in default SOM configuration | |
| SPI NOR Flash | Yes | Yes | Enabled | N25Q128A on QSPI_A | |
| EEPROM on SOM | Yes | Yes | Enabled | M24C32 on i2c1 | |
| EEPROM on eval board | Yes | Yes | Enabled | CAT24C32 on i2c4 PEB-EVAL-02 | |
| eMMC | Yes | Yes | Enabled | MTFC4GMDEA-4M on SD3 | |
| RTC | Internal i.MX7 | Yes | Yes | Enabled | SNVS RTC |
| External RTC | Yes | Yes | Enabled | RV-4162-C7 on I2C1 | |
| Power Management | PMIC | Yes | Yes | Enabled | PF3000 on I2C1 |
| JTAG | JTAG | ARM JTAG 20 connector on PEB-EVAL-02 | |||
| PCIe | mini-pcie | Yes | No | Disabled | connector X12 |
[1] Interface requires additional configuration, such as pinmuxing. It may be possible to change the software configuration to utilize this interface even if it is not being set in the board's default configuration. Please see NXP's i.MX7D Technical Reference Manual for more information on the various modes each pin can be muxed to.
For further information or to report any problems, visit the PHYTEC Support Portal