|
phyCORE-OMAP4430 Linux Board Support Package PD11.1.0 Release Notes
|
This is release PD11.1.0 of phyCORE-OMAP4430 Linux Board Support Package (BSP).
This BSP provides a basis for development, deployment and execution of Linux based applications on the phyCORE-OMAP4430 System on Module.
For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.
Release PD11.1.0 can be downloaded from the link below.
ftp://ftp.phytec.com/products/PCM-049_phyCORE-OMAP44xx/Linux/PD11.1.0/
Release PD11.0.0 should be used in conjunction with Quickstart version PD11.1.0:
This BSP Release supports the following components:
Important:
The demo binary image included in Release PD11.1.0 does not enable SPI. If SPI is required, you must enable SPI with your own build.
OpenGL support is not activated in the Images nor in the BSP due the GraphicSDK licences. It can be activated with PTXdist with:
ptxdist menuconfig PTXdist Base Configuration ---> Graphics & Multimedia ---> <*> graphics_sdk ---> (y) Accept the License for Graphics SDK? OMAPES (7.x for AM45x (Panda board/phyCORE-OMAP4)) [*] install /etc/init.d/rc.pvr save & exit ptxdist images
Coming soon...
N/A
N/A
This Release is compatible with the following hardware:
BSP Release | SOM PCB Version | CB PCB Version |
---|---|---|
PD11.1.0 | 1347.1 | 1348.2 |
PD11.1.0 | 1347.1 | 1348.1 |
To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.
N/A
For further support please visit PHYTEC's Support Portal