|
This BSP provides a basis for development, deployment and execution of Linux based applications on the phyFLEX-i.MX6 System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.
|
This Release is compatible with the following hardware:
BSP Release Version | BSP Release Date | SOM PCB Version | FLEX Mapper Board Version | FLEX Baseboard Version |
---|---|---|---|---|
PD13.2.3 | February 28th, 2014 | 1362.2 | 1367.3 | 1364.4 |
1362.1 | 1367.2 [A] | 1364.3 [B] | ||
1367.1 [B] | 1364.2 [A] |
[A] Does not fully support PCIe. FLEX Mapper board does not include nPCIe0_PERST. FLEX Baseboard missing 100Ω termination resistor on PCIe clock and reset for an extra PCIe.[B] Hardware interface does not support Camera0 interface extension and full 18-bit Camera0 (missing J6 and J7 for CSI0_DAT3 and CSI0_DAT2 signal multiplexing). Different reset out circuitry for Camera0 and Camera1. JP12 does not exist (X_CAMERA1_CLK & X_CAMERA0_CLK).
Release PD13.2.3 can be downloaded from the link below.
ftp://ftp.phytec.com/products/PFL-A-02_phyFLEX-iMX6/Linux/PD13.2.3/
Due to the wide variety of configurations (Quad/DualLite/Solo, RAM sizes, and WiFi) for the i.MX6 SOM please note that there are different versions of software. Use the list below for a description of the images to be used for specific configurations:
i.MX6 Quad1 GB RAM (default) - bootloader: barebox-phytec-pbab01-1gib.img1 GB, 1 bank RAM - bootloader: barebox-phytec-pbab01-1gib_1bank.img4 GB RAM - bootloader: barebox-phytec-pbab01-4gib.img; kernel: 4GB_RAM_LINUX/uImage-pfla02_4GB
i.MX6 DualLite1 GB RAM - bootloader: barebox-phytec-pbab01dl-1gib.img
i.MX6 Solo512 MB RAM - bootloader: barebox-phytec-pbab01s-512mb.img; kernel: 512MB_RAM_LINUX/uImage-pfla02_512MB
Release PD13.2.3 should be used in conjunction with Quickstart version PD13.2.0:
This BSP Release supports the following components:
Quad: 1GB, 1GB_1bank, 4GB[1]DualLite: 1GBSolo: 512MB
Resistive: STMPE811 on I2C0 (device on Baseboard)Capacitive: FocalTech FT5306 on I2C0
Prime View PD050VL1 LVDS (LCD-017-050V)Prime View PM070WL4 LVDS (LCD-017-070W)Prime View PD104SLF LVDS (LCD-017-104S)EDT ETM0700G0DH6 TTL (LCD-018-070-KAP)DVI / HDMI
VM-006-BWVM-009VM-010-BWVM-011-BW (phyCAM-P)VM-011-COL (phyCAM-S)USB-CAM-003H (with UVC Firmware update)USB-CAM-103H (with UVC Firmware update) (without trigger)USB-CAM-051H (with UVC Firmware update)USB-CAM-151H (with UVC Firmware update) (without trigger)
Note: Signal names may change between processor and PCBs. Please refer to phyFLEX-i.MX6 Hardware Manual for signal name mapping.
This BSP Release does not support the following components:
N/A
This BSP is not backwards compatible and has no workaround for 1362.0 SOM and 1364.1 Baseboard due to a change in PCB pinout, see Modification of the pinout for the phyFLEX-i.MX6 (PLF-A-XL1).
N/A
Drivers have been tested with in-house test cases.
For further support please visit PHYTEC's Support Portal