|
This BSP provides a basis for development, deployment and execution of Linux based applications on the phyFLEX-i.MX6 System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.
|
This Release is compatible with the following hardware:
BSP Release Version | BSP Release Date | SOM PCB Version | FLEX Mapper Board Version | FLEX Baseboard Version |
---|---|---|---|---|
PD12.0.3 | 12/10/2012 | 1362.0 | 1367.1 | 1364.2 |
Release PD12.0.3 can be downloaded from the link below.
ftp://ftp.phytec.com/products/PFL-A-02_phyFLEX-iMX6/Linux/PD12.0.3/
Release PD12.0.3 should be used in conjunction with Quickstart version PD12.0.3:
This BSP Release supports the following components:
This BSP Release does not support the following components:
N/A
N/A
To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.
N/A
Drivers have been tested with in-house test cases.
For further support please visit PHYTEC's Support Portal