|
This BSP provides a basis for development, deployment and execution of Linux based applications on the AM57x System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.
|
Default dts target | am57xx-phycore-rdk.dts | |
Default dtsi include description | Default dtsi include list | |
SOM | am57xx-phycore-som.dtsi | |
Carrier Board | am57xx-pcm-948.dtsi | |
LCD-018 display (7" display w/ cap. touch) | am57xx-phytec-lcd-018.dtsi | |
WiLink8 | am57xx-phytec-wlan-wilink8.dtsi |
SOM PCB Version | CB PCB Version |
---|---|
1428.3 | 1435.2 |
Prebuilt images of BSP-Yocto-TISDK-AM57xx-PD16.1.0 can be downloaded from the link below:
BSP-Yocto-TISDK-AM57xx-PD16.1.0 Release
Quickstarts for BSP-Yocto-TISDK-AM57xx-PD16.1.0:
In the table below highlight supported and tested items with a "Green" box and non supported or un tested or notes issues with a "red" box
Interface | Detail | Implemented | Tested | Enabled in DTS | Notes |
---|---|---|---|---|---|
UART | uart3 | Yes | Yes | Yes | Connector X18 (default serial console) |
uart4 | Yes | No | SupportedInterfacesFootnote_1 | ||
uart5 | Yes | Yes | SupportedInterfacesFootnote_1es | Connector X17 | |
uart6 | Yes | No | SupportedInterfacesFootnote_1 | ||
uart7 | Yes | No | SupportedInterfacesFootnote_1 | ||
uart8 | Yes | No | SupportedInterfacesFootnote_1 | ||
uart9 | Yes | No | SupportedInterfacesFootnote_1 | ||
uart10 | Yes | No | SupportedInterfacesFootnote_1 | ||
I2C | i2c1 | Yes | Yes | Yes | Available on expansion Connector X28 |
i2c2 | Yes | Yes | Yes | Connected to HDMI1_DDC | |
i2c3 | Yes | No | SupportedInterfacesFootnote_1 | ||
i2c4 | Yes | Yes | Yes | Used for Audio Codec - available on expansion Connector X28 | |
i2c5 | Yes | No | SupportedInterfacesFootnote_1 | ||
Ethernet | cpsw_emac0 (RGMII0 on SoM) | Yes | Yes | Yes | RGMII0 - KSZ9031RNX SoM PHY Connector X7 |
cpsw_emac1 (RGMII1 on CarrierBoard) | Yes | Yes | Yes | RGMII1 - KSZ9031RNX Connector X8 | |
Display and Touch | Analog Touch Control 1 | Yes | Yes | Yes | Capacitive: ETM-FT5x06 (on LCD-018), I2C4 |
Analog Touch Control2 | No | No | No | Resistive: STMPE811 (on CB), I2C4 | |
PWM Backlight | Yes | Yes | Yes | ehrpwm0 (EHRPMW1A on CB) | |
24-bit LCD Interface | Yes | see KnownIssues | Yes | LVDS Connector X25 requires LCD-018 | |
HDMI | Yes | see KnownIssues | No | hdmi1_ddc Connector X24 (encoder TPD12S on carrier board) | |
McASP | mcasp1 | Yes | Yes | Yes | |
mcasp2 | Yes | No | SupportedInterfacesFootnote_1 | ||
mcasp5 | Yes | No | SupportedInterfacesFootnote_1 | ||
mcasp6 | Yes | No | SupportedInterfacesFootnote_1 | ||
mcasp7 | Yes | No | SupportedInterfacesFootnote_1 | ||
mcasp8 | Yes | No | SupportedInterfacesFootnote_1 | ||
eMMC/SD/SDIO | mmc1 | Yes | Yes | Yes | Connector X2 |
mmc2 | Yes | Yes | Yes | eMMC on SOM | |
mmc3 | Yes | Yes | SupportedInterfacesFootnote_1es | Connector X26 (WiFi/BT connector) | |
USB | usb1 | Yes | Yes | Yes | USB 3.0 Standard-A Connector X30 (Host only) |
usb2 | Yes | see KnownIssues | Yes | USB 2.0 Mini-AB Connector X9 (device default); signals may also be routed to X19 (Standard-A) | |
CAN | can1 | Yes | Yes | Yes | DB9 Connector X6 |
can2 | Yes | Yes | Yes | Pin Header Connector X5 | |
MCSPI | spi1 | Yes | No | SupportedInterfacesFootnote_1 | |
spi2 | Yes | No | SupportedInterfacesFootnote_1 | ||
spi3 | Yes | No | SupportedInterfacesFootnote_1 | ||
spi4 | Yes | No | SupportedInterfacesFootnote_1 | ||
QSPI | qspi1 | Yes | No | No | NOR Serial Flash on SOM |
SATA | sata1 | Yes | Yes | Yes | Connector X11 (SATA) and X12 (power connector) |
PCIe | pcie1 | Yes | Yes | Yes | Connector X27 (PI6C557 4x PCIe Connector) |
IPU | ipu1 | Yes | Yes | Yes | |
ipu2 | Yes | Yes | Yes | ||
DSP | dsp1 | Yes | Yes | Yes | |
dsp2 | Yes | Yes | Yes | ||
GPIO | User Buttons and LEDs | Yes | Yes | Yes | |
Memory | EEPROM | Yes | Yes | Yes | M24C32 on I2C1 |
NAND (8/16 bit) | Yes | No | No | No NAND populated | |
QSPI NOR Flash | No | No | No | N25Q128A connected to QSPI1 | |
eMMC | Yes | Yes | Yes | mmc2 on SOM | |
RTC | Internal AM57xx | Yes | Yes | Yes | Internal to processor |
PMIC TPS659037 | Yes | Yes | Yes | TPS659037 I2C1 | |
External RTC | Yes | Yes | Yes | RV-4162-C7 on I2C1 | |
Audio | Stereo Codec on CarrierBoard | Yes | Yes | Yes | TLV320AIC3007 codec; connected to McASP1 and I2C4 |
Communication | TiWi-BLE WiFi | No | No | No | Connector X26 |
TiWi-BLE Bluetooth | No | No | No | Connector X26 | |
WiLink8 WiFi | Yes | Yes | Yes | Connector X26 | |
Parallel Camera | VIN3 on i2c3 | No | No | Not Configured | X23 (phyCAM-P connector) |
Hardware Acceleration | Graphics (PowerVR SGX544) | Yes | see KnownIssues | Yes |
[1] It may be possible to change the software configuration to utilize this interface even if it is not being set in the board's default configuration.
Yocto
For further support please visit PHYTEC's Support Portal