Operating SystemTI-RTOS
BSP Release Status

RELEASED

Release Date

   

RepositoryPHYTEC Public Repos
Binaries
Source Archive
Release Notes




Introduction


This BSP provides a basis for development, deployment and execution of TI-RTOS based applications on the phyCORE-AM57x System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.

Versioning


Software

Components

Component NameComponent Version
CG_XML2.41.0
CTOOLSLIB2.2.0.0
DSPLIB3.4.0.0
EDMA3 LLD2.12.5.29
FC3.40.2.7
IMGLIB3.1.1.0
IPC3.46.2.4
MATHLIB3.1.1.0
NDK2.25.1.11
OPENCL1.1.14.1
OPENMP2.6.2.0
PDK1.0.8
SYS/BIOS6.46.5.55
UIA2.0.6.52
XDAIS7.24.0.4
XDCTOOLS3.32.1.22

Compilers

Compiler NameCompiler Version
GNU ARM Embedded4.9-2015q3
TI ARM CGT16.9.3
TI C6000 CGT8.1.3
TI PRU CGT2.1.5

Compatible Hardware

Supported Hardware Versions

Hardware DescriptionPCB Version
phyCORE-AM57x SOM

1428.3

phyCORE-AM57x Carrier Board1435.2

BSP Download 


Prebuilt images of BSP-RTOS-TI-AM57x-PD17.1.0 can be downloaded from the link below:

BSP-RTOS-TI-AM57x-PD17.1.0 Release

Quickstart


Quickstarts for BSP-RTOS-TI-AM57x-PD17.1.0:

BSP Features


InterfaceDetailTested

Notes

UARTuart3YesConnector X18 (default serial console)
uart4No
uart5YesConnector X17
uart6No
uart7No
uart8No
uart9No
uart10No
I2Ci2c1YesAvailable on expansion Connector X28
i2c2YesConnected to HDMI1_DDC
i2c3No
i2c4NoUsed for Audio Codec - available on expansion Connector X28
i2c5No
Ethernetcpsw_emac0 (RGMII0 on SoM)Yes

RGMII0 - KSZ9031RNX SoM PHY

Connector X7

cpsw_emac1 (RGMII1 on CarrierBoard)Yes

RGMII1 - KSZ9031RNX Connector X8

Display and TouchAnalog Touch Control 1NoCapacitive: ETM-FT5x06 (on LCD-018), I2C4
Analog Touch Control2NoResistive: STMPE811 (on CB), I2C4
PWM BacklightYesehrpwm0 (EHRPMW1A on CB)
24-bit LCD InterfaceNo

LVDS Connector X25

requires LCD-018

HDMIYes

hdmi1_ddc

Connector X24 (encoder TPD12S on carrier board)

McASPmcasp1No
mcasp2No
mcasp5No
mcasp6No
mcasp7No
mcasp8No
eMMC/SD/SDIOmmc1YesConnector X2
mmc2YeseMMC on SOM
mmc3NoConnector X26 (WiFi/BT connector)
USBusb1see Known IssuesUSB 3.0 Standard-A Connector X30 (Host only)
usb2see Known IssuesUSB 2.0 Mini-AB Connector X9 (device default); signals may also be routed to X19 (Standard-A)
CANcan1YesDB9 Connector X6
can2YesPin Header Connector X5
MCSPIspi1NoConnector X28 (Expansion connector) enabled using spidev on X_SPI1_nCS0
spi2No
spi3No
spi4No
QSPIqspi1NoNOR Serial Flash on SOM
SATAsata1NoConnector X11 (SATA) and X12 (power connector)
PCIepcie1NoConnector X27 (PI6C557 4x PCIe connector)
IPUipu1No
ipu2No
DSPdsp1Yes
dsp2Yes
GPIO

User Buttons and LEDs

Yes
MemoryEEPROMNoM24C32 on I2C1
NAND (8/16 bit)NoNo NAND populated
QSPI NOR FlashNoN25Q128A connected to QSPI1_CS2
eMMCYesmmc2 on SOM
RTCInternal AM57xxNoInternal to processor
PMIC TPS659037NoTPS659037 I2C1
External RTCNoRV-4162-C7 on I2C1
Audio

Stereo Codec on CarrierBoard

NoTLV320AIC3007 codec; connected to McASP1 and I2C4
CommunicationTiWi-BLE WiFiNoConnector X26
TiWi-BLEBluetoothNoConnector X26
WiLink8 WiFiNoConnector X26
Parallel CameraVIN3 on i2c3NoVM-009 at Connector X23 (phyCAM-P connector)
Hardware AccelerationGraphics (PowerVR SGX544)No

New In This Release


This is the first release so all features supported in the Features section are new to this release. See below for some specific interface details.

Fixed In This Release


N/A

Known Issues


Texas Instruments Known Issues

Technical Support

For further support please visit PHYTEC's Support Portal