Phytec中国的wiki
support@phytec.cn
热线:0755-61802110-803
请参考我们的开发板使用说明文档,如果您购买了开发板,会有一份纸质的说明在里面。
第一次使用,请确保满足以下条件:
- 使用一条USB-RS232的线连接调试口
- 为开发板供电
- JP1没有短接
- PC端使用Console软件如Putty,已经使用下图参数打开了USB串口
在接通电源后,可以在Console软件中看到如下提示消息:
barebox 2017.04.0-00001-g47dcf67 #2 Wed Mar 20 03:10:40 CET 2019 Board: Phytec phyCORE-i.MX6 Ultra Lite SOM detected i.MX6 UltraLite revision 1.2 mdio_bus: miibus0: probed eth0: got preset MAC address: 50:2d:f4:10:f6:3f nand: ONFI flash detected nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron MT29F4G08ABADAH4), 512MiB, page size: 2048, OOB size: 64 Bad block table found at page 262080, version 0x01 Bad block table found at page 262016, version 0x01 imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2190000.usdhc: registered as 2190000.usdhc netconsole: registered as netconsole-1 phySOM-i.MX6: Using environment in NAND flash malloc space: 0x8fefd4c0 -> 0x9fdfa97f (size 255 MiB) running /env/bin/init... Hit m for menu or any other key to stop autoboot: 2
- 这是我们开发板使用的bootloader打印的信息,他叫做barebox,使用起来和linux系统很像
- 这里的例子使用的版本可能和你手上的不同
- 倒计时三秒,系统会继续载入内核,并启动Linux系统
- 在最后的
Hit m for menu or any other key to stop autoboot: 倒计时中按任意键可以进入bootloader的界面
... ____ _ _ __ __ _____ _____ ____ | _ \ | | | |\ \ / /|_ _|| ____| / ___| | |_) || |_| | \ V / | | | _| | | | __/ | _ | | | | | | |___ | |___ |_| |_| |_| |_| |_| |_____| \____| __ __ ___ ____ _ _ ____ _____ \ \ / / / _ \ / ___|| | | || _ \ |_ _| \ V / | | | || | _ | | | || |_) | | | | | | |_| || |_| || |_| || _ < | | |_| \___/ \____| \___/ |_| \_\ |_| Yogurt Vendor (Phytec Vendor Distribution) BSP-Yocto-Vendor-phyBOARD-Segin-PD17.1.2 phyboard-segin-imx6ul-2 ttymxc0 phyboard-segin-imx6ul-2 login: root root@phyboard-segin-imx6ul-2:~#
在出现上图界面后,表示系统已启动完成,此时输入 root
即可登入系统。
Overview
Content Tools
Tasks