|
This BSP provides a basis for development, deployment and execution of Linux based applications on the phyBOARD-WEGA-AM335x Single Board Computer (SBC). For detailed information on the various software components included in the release and how to use them, please refer to theQuickstart.
|
This Release is compatible with the following hardware:
BSP Release Version | BSP Release Date | SOM PCB Version | CB PCB Version |
---|---|---|---|
PD13.0.0 | November 11th, 2013 | 1358.3 (DSC) | 1405.0 |
Expansion Modules
Module Name | Part Number | PCB Version | Description |
---|---|---|---|
Power Module | PEB-POW-01 | 1410.1 | 12 V - 24 V input voltage; 5 V and 3.3 V output voltage |
Evaluation Board | PEB-EVAL-01 | 1413.1 [1] | 3x User Buttons; 3x User LEDs; RS-232 via UART0; JTAG |
HDMI Display Adapter | PEB-AV-01 | 1406.0 | HDMI interface, Audio over I2S |
LCD Display Adapter | PEB-AV-02 | 1415.0 | Display / Touch Interface (LVDS / 4Wire) |
Release PD13.0.0 can be downloaded from the link below.
ftp://ftp.phytec.com/products/PBA-CD-02_phyBOARD-WEGA-AM335x/Linux/PD13.0.0/
Release PD13.0.0 should be used in conjunction with the following documentation:
This BSP Release supports the following components:
EEPROM: at24 on I2C_0RTC: RV-4162-C7 external RTC on I2C_0
This BSP Release does not support the following components:
EDT ETM0700G0DH6 TTL (PEB-AV-02 - 1415.1 only)
Capacitive (PEB-AV-02 - 1415.1 only)
N/A
N/A
To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.
N/A
Drivers have been tested with in-house test cases.
For further information or to report any problems, visit the PHYTEC Community or contact support@phytec.com.