Introduction
This BSP provides a basis for development, deployment and execution of Linux based applications on the phyBOARD-WEGA-AM335x Single Board Computer (SBC). For detailed information on the various software components included in the release and how to use them, please refer to theQuickstart.
Versioning
This Release is compatible with the following hardware:
| BSP Release Version | BSP Release Date | SOM PCB Version | CB PCB Version |
|---|---|---|---|
| PD14.1-rc1 | February 12, 2015 | 1358.3 (DSC) | 1405.1 |
| 1405.0 |
Expansion Modules
| Module Name | Part Number | PCB Version | Description |
|---|---|---|---|
| Power Module | PEB-POW-01 | 1410.1 | 12 V - 24 V input voltage; 5 V and 3.3 V output voltage |
| Evaluation Board | PEB-EVAL-01 | 1413.1 | 3x User Buttons; 3x User LEDs; RS-232 via UART0; JTAG |
| HDMI Display Adapter | PEB-AV-01 | 1406.1 | HDMI interface, Audio over I2S |
| 1406.0 [1] | |||
| LCD Display Adapter | PEB-AV-02 | 1415.1 | Display / Touch Interface (LVDS / 4Wire) |
| 1415.0 [1] |
[1] No HDMI Audio support.
BSP Download
Release PD14.1-rc1 can be downloaded from the link below.
ftp://ftp.phytec.com/products/PBA-CD-02_phyBOARD-WEGA-AM335x/Linux/PD14.1-rc1/
Quickstart
Release PD14.1-rc1 should be used in conjunction with the following documentation:
- PhyBOARD-WEGA-AM335x_Linux_Quickstart_PD14.1-rc1
- phyBOARD - Application Guide
- Expansion Boards - Application Guide
What’s Supported
This BSP Release supports the following components:
- Linux Kernel: 3.12
- Processor: AM3354
- NAND Flash: Bootloader, Kernel, Filesystem
- UART: RS-232 on UART_1; RS-232 on UART_0 (PEB-EVAL-01) - default console
- USB: USB_0-OTG; USB_1-OTG enabled for Host mode
- Ethernet: 2x 10/100 Mbit/s (EMAC1 and EMAC2)
- SD / MMC: MMC_0 enabled
- CAN: CAN_1 enabled
- I2C: I2C_0 enabled
EEPROM: at24 on I2C_0RTC: RV-4162-C7 external RTC on I2C_0
- GPIO: User LED; User button (PEB-EVAL-01)
- Audio: Speaker-in; Speaker-out
- HDMI
What’s Not Supported
This BSP Release does not support the following components:
Fixed in this Release
N/A
New in this Release
N/A
Known Issues
- USB babble interrupts when USB devices are plugged in.
Upgrade and Compatibility Information
To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.
Dependencies
N/A
Validation Information
Drivers have been tested with in-house test cases.
Technical Support
For further information or to report any problems, visit the PHYTEC Community or contact support@phytec.com.