Introduction
This BSP provides a basis for development, deployment and execution of Linux based applications on the phyBOARD-WEGA-AM335x Single Board Computer (SBC). For detailed information on the various software components included in the release and how to use them, please refer to theQuickstart.
Versioning
This Release is compatible with the following hardware:
BSP Release Version | BSP Release Date | SOM PCB Version | CB PCB Version |
---|---|---|---|
PD14.1.0 | February 24th, 2014 | 1358.3 (DSC) | 1405.1 |
1405.0 |
Expansion Modules
Module Name | Part Number | PCB Version | Description |
---|---|---|---|
Power Module | PEB-POW-01 | 1410.1 | 12 V - 24 V input voltage; 5 V and 3.3 V output voltage |
Evaluation Board | PEB-EVAL-01 | 1413.1 | 3x User Buttons; 3x User LEDs; RS-232 via UART0; JTAG |
HDMI Display Adapter | PEB-AV-01 | 1406.1 | HDMI interface, Audio over I2S |
1406.0 [1] | |||
LCD Display Adapter | PEB-AV-02 | 1415.1 | Display / Touch Interface (LVDS / 4Wire) |
1415.0 [1] |
[1] No HDMI Audio support.
BSP Download
Release PD14.1.0 can be downloaded from the link below.
ftp://ftp.phytec.com/products/PBA-CD-02_phyBOARD-WEGA-AM335x/Linux/PD14.1.0/
Quickstart
Release PD14.1.0 should be used in conjunction with the following documentation:
What’s Supported
This BSP Release supports the following components:
- Linux Kernel: 3.2
- Processor: AM3354
- NAND Flash: Bootloader, Kernel, Filesystem
- UART: RS-232 on UART_1; RS-232 on UART_0 (PEB-EVAL-01) - default console
- USB: USB_0-OTG; USB_1-OTG enabled for Host mode
- Ethernet: 2x 10/100 Mbit/s (EMAC1 and EMAC2)
- SD / MMC: MMC_0 enabled
- CAN: CAN_1 enabled
- SPI: SPI_0 enabled
- I2C: I2C_0 enabled
EEPROM: at24 on I2C_0RTC: RV-4162-C7 external RTC on I2C_0
- GPIO: User LED; User button (PEB-EVAL-01)
- Display:
EDT ETM0700G0DH6 TTL (PEB-AV-02 - 1415.1 only)
- Touch:
Capacitive (PEB-AV-02 - 1415.1 only)
What’s Not Supported
This BSP Release does not support the following components:
- Audio: Speaker-in; Speaker-out
- HDMI - experimental only supporting 720p and XGA (PEB-AV-01)
- OpenGL
- Power Management: Standby and suspend-to-RAM
Fixed in this Release
N/A
New in this Release
- Display/Touch support for PEB-AV-02 - 1415.1 (not backward compatible with release PD13.1.0_CR1)
- Full support for PEB-EVAL-01 - 1413.1
Known Issues
- LiveDVD runs Ubuntu 12.04 LTS which requires a security update for OpenSSL to protect against the heartbleed bug.
Upgrade and Compatibility Information
To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.
Dependencies
N/A
Validation Information
Drivers have been tested with in-house test cases.
Technical Support
For further support please visit PHYTEC's Support Portal